Empowering 11,000+ WordPress Creators • Est. 2020
Free · Instant · No Sign-Up Required

무료 리디렉션 검사기 & URL Redirect Tester

Instantly trace the full redirect chain of any URL. See every HTTP status code hop-by-hop — 301, 302, 307, 308 — detect redirect loops, broken chains, missing HTTPS redirects, and slow multi-hop chains that leak link equity. Supports single URL and bulk redirect checking.

🔗 전체 리디렉션 체인 🔢 정확한 HTTP 상태 코드 ♻️ 루프 감지 🔒 HTTP → HTTPS Check 📋 대량 URL 검사기 ⚡ 즉시 결과

HTTP Redirect Status Codes — Quick Reference

우리의 리디렉션 검사기 모든 홉에서 정확한 코드를 보고합니다. SEO에 대한 각각의 의미는 다음과 같습니다.

200

OK

Final destination — page loads successfully. No action needed.

301

영구 이전됨

영구적으로 이동된 페이지에 대한 올바른 리디렉션입니다. 링크 자산의 ~99%를 새 URL에 전달합니다.

302 ⚠️

발견됨(임시)

Tells crawlers the move is temporary — does not pass full link equity. Change to 301 if permanent.

307 ⚠️

임시 리디렉션

302의 HTTP/1.1 버전. 요청 방법을 유지합니다. 표준 영구 리디렉션에는 301을 사용하세요.

308

영구 리디렉션

Like 301 but preserves HTTP method (POST stays POST). Rarely needed — use 301 for most pages.

404 🔴

찾을 수 없음

페이지가 존재하지 않습니다. 페이지를 생성하거나, 301 리디렉션을 설정하거나, 인바운드 링크를 제거하여 문제를 해결하세요.

410 🔴

다 쓴

페이지가 영구적으로 삭제되었습니다. Google은 404보다 빠르게 색인을 해제합니다. 의도적으로 콘텐츠를 삭제할 때 사용하세요.

500 🟠

서버 오류

Server-side error. Not a redirect issue — check your server configuration and error logs.

고리 ♻️

루프 리디렉션

URL redirects back to itself infinitely. Googlebot stops after 3 hops — page becomes un-indexable.

Redirects & SEO

리디렉션 검사기란 무엇이며 모든 SEO에 왜 필요한가요?

A 리디렉션 검사기 (also called a URL redirect tester) is a tool that follows every HTTP redirect from a starting URL to its final destination — revealing the exact status code at each hop. Redirects are a fundamental part of web and SEO management: every time a page is moved, renamed, or consolidated, a redirect should be in place to preserve the URL's rankings, traffic, and link equity.

문제는 리디렉션이 잘못 구성되기 쉽다는 것입니다. 단일 오타로 인해 리디렉션 루프가 생성됩니다. 잊혀진 리디렉션은 트래픽이 많은 페이지를 404로 전환합니다. 서로 연결된 여러 리디렉션은 Google의 크롤링 예산을 낭비하고 모든 홉에서 링크 자산을 흘립니다. 우리의 무료 URL 리디렉션 검사기 traces the full chain instantly — so you can see exactly what's happening before Google does.

Use this tool to audit your own redirects after a migration, check competitor URLs, verify that HTTP→HTTPS redirects are working, or confirm that old URLs are correctly pointing to their new destinations.

🔗

모든 홉 추적

See every URL in the chain, the HTTP code it returns, and where it points next — all the way to the final destination.

📉

링크 자산 손실 식별

각 리디렉션 홉은 소량의 PageRank를 잃을 수 있습니다. 다중 홉 체인(3+)은 특히 비용이 많이 듭니다. 301 리디렉션 검사기는 귀하의 URL이 사용하는 홉 수를 정확하게 보여줍니다.

🔒

HTTPS 마이그레이션 확인

HTTP에서 HTTPS로 이동한 후 모든 HTTP URL은 해당 HTTPS로 리디렉션되어야 합니다. 우리 도구는 귀하가 테스트하는 모든 URL에 대해 이것이 올바르게 작동하는지 확인합니다.

♻️

리디렉션 루프 감지

A loop (A → B → A) makes a page uncrawlable by Googlebot and unreachable by visitors. Our redirect detector catches loops instantly.

301 리디렉션 검사기

301 리디렉션을 확인하고 깨진 리디렉션 체인을 수정하는 방법

A 301 리디렉션 is the SEO-safe way to permanently move a page. When correctly configured, it passes approximately 99% of the source URL's link equity to the destination — preserving rankings, backlink value, and organic traffic. Our free 301 리디렉션 검사기 도구 해당 체인의 모든 단계를 확인하여 자산이 실제로 흐르고 있는지 알 수 있습니다.

싱글 301이 이상적이다

A → B (301) is the cleanest possible redirect. The source page passes all its equity to the destination in one hop.

⚠️

Two hops — review it

A → B → C means the source passes through an intermediate URL. Update the first redirect to point directly to C.

🔴

Three+ hops — fix urgently

각 홉은 자산을 희석시키고 대기 시간을 추가합니다. 3개 이상의 홉은 즉시 단일 직접 리디렉션으로 축소되어야 합니다.

♻️

Loop — critical failure

A → B → A means Googlebot loops forever and never indexes the final page. Fix by identifying the circular redirect rule and removing it.

대량 리디렉션 검사기

Bulk URL Redirect Checker — Check Up to 10 URLs at Once

사이트 마이그레이션, URL 재구성 또는 CMS 변경 후에는 일반적으로 확인해야 할 리디렉션이 수십 또는 수백 개 있습니다. 우리의 대량 리디렉션 검사기 lets you paste up to 10 URLs at once and checks every redirect chain simultaneously — showing the hop count, final URL, final status code, and any issues for each one.

대량 URL 리디렉션 검사기는 다음과 같은 경우에 특히 유용합니다.

  • Post-migration redirect verification — confirm every old URL redirects correctly
  • Auditing HTTPS redirects — check all HTTP variants redirect to HTTPS
  • Checking backlink URLs — ensure links from other sites still reach your content
  • Google Search Console에 제출하기 전에 리디렉션 경로 검사기 결과 확인
💡

결과를 CSV로 내보내기

The bulk redirect checker includes a CSV export for every run — so you can share the redirect audit report with your team or client, or keep it as a record of your migration verification.

404 오류를 발견하셨나요?

How to Fix 404 Errors on Your WordPress Site Automatically — Using AI

404로 종료되는 잘못된 리디렉션 체인은 크롤링 예산 낭비, 링크 자산 상실, 이탈하는 방문자의 좌절 등 실제 SEO 피해를 의미합니다. 과거에는 수백 개의 404 오류를 수정하려면 스프레드시트에서 수동으로 이전 URL을 새 페이지에 연결하고 하나씩 리디렉션을 생성하는 데 몇 시간이 걸렸습니다.

스카이SEO매니저 프로 이것을 완전히 변경합니다. WordPress 대시보드에 직접 통합된 Google의 Gemini AI를 사용하면 다음이 가능합니다.

  1. 1

    404 오류를 식별합니다.

    WordPress 사이트를 검사하고 서버 로그 및 Google Search Console 데이터에서 손상된 모든 URL을 가져옵니다.

  2. 2

    손상된 각 URL을 최상의 라이브 페이지에 매핑합니다.

    Gemini AI reads the broken URL's context and semantics — then scans your live content and identifies the most relevant active page as a redirect destination.

  3. 3

    301 리디렉션을 자동으로 생성합니다.

    Applies the correct 301 redirects directly inside WordPress with one click — no .htaccess editing, no separate plugin, no spreadsheets.

😤

Without AI — Manual Method

  • Search Console에서 404 목록 내보내기(15분)
  • 스프레드시트에서 깨진 각 URL 열기(30분)
  • 일치하는 라이브 페이지를 수동으로 검색합니다(시간).
  • 리디렉션 플러그인에 리디렉션을 하나씩 입력합니다(시간).
  • 각 리디렉션을 개별적으로 테스트(30분)

Total: 4–8 hours per site. Prone to human error. Can't scale.

🤖

SkySEOManager Pro + Gemini AI 사용

  • AI가 404 오류를 모두 스캔하고 식별합니다(자동).
  • Gemini는 깨진 각 URL을 최상의 라이브 페이지로 매핑합니다(초).
  • 대시보드에서 AI 제안 검토(5분)
  • 한 번의 클릭으로 301 리디렉션 적용
  • 리디렉션 검사기를 사용하여 확인(2분)

전체: 10분 이내. 1,000개 이상의 깨진 URL이 있는 사이트에서 작동합니다.

HTTP→HTTPS & www

HTTPS Redirect Check — Verify Your SSL Migration Is Working

After installing an SSL certificate, every HTTP URL must redirect to HTTPS. Our redirect checker verifies this — and also checks that www/non-www variants redirect consistently.

🔒 HTTP → HTTPS Redirect Check

# 맞습니다 ✅
http://example.com → 301 → https://example.com
# 301 대신 302 사용 ⚠️
http://example.com → 302 → https://example.com
# HTTPS 리디렉션 누락 🔴
http://example.com → 200 (아직 HTTP에 있음)

Google uses HTTPS as a ranking signal. All HTTP traffic must 301-redirect to HTTPS — not 302. Use our free https 리디렉션 확인 위의 도구를 사용하여 확인하세요.

🌐 www 대 www가 아닌 ​​정식화

# 일관성(www가 아닌 ​​것이 선호됨) ✅
http://www.example.com → 301 → https://example.com
https://www.example.com → 301 → https://example.com
# Inconsistent — creates duplicate content 🔴
www.example.com → 200 (다른 내용)
example.com → 200 (동일한 내용)

Your site must consistently redirect to either www or non-www — never both. Google treats them as different URLs. Pick one and 301-redirect all variants to it.

404 오류가 있는 WordPress 사이트의 경우

This redirect checker finds the problem. SkySEOManager Pro fixes it — automatically.

깨진 리디렉션 체인이나 404 오류를 발견하셨나요? 스카이SEO매니저 프로 uses Gemini AI to map every broken URL on your WordPress site to the most relevant live page — then creates 301 redirects automatically. What used to take hours takes minutes.

  • AI는 모든 404 오류를 식별하고 자동으로 라이브 페이지에 매핑합니다.
  • One-click 301 redirect creation inside WordPress — no .htaccess editing
  • Gemini AI를 사용한 대량 SEO 제목, 설명 및 대체 텍스트 생성
  • Works with SkySEOManager — no plugin conflicts
11,000+
활성 설치
Gemini AI
구동
자동 301
리디렉션이 생성되었습니다.
14일
환불 보장

자주 묻는 질문

리디렉션 검사기란 무엇이며 어떻게 작동합니까?
A redirect checker (also called a URL redirect tester or redirect path checker) is a tool that sends an HTTP request to a URL and follows every redirect manually — recording the status code and destination URL at each step. Instead of letting your browser silently follow redirects, it shows you each hop in the chain so you can see whether redirects are configured correctly, how many hops there are, and what the final status code is.
301 리디렉션이 작동하는지 어떻게 확인하나요?
위의 무료 301 리디렉션 검사기에 원래 URL을 입력하고 '리디렉션 확인'을 클릭하세요. 301 리디렉션이 설정된 경우 체인은 HTTP 301을 반환하고 대상 URL을 가리키는 원래 URL을 표시합니다. 도구에 200(이전 URL이 직접 확인됨)이 표시되면 리디렉션이 설정되지 않은 것입니다. 302가 표시되면 리디렉션이 존재하지만 영구 대신 임시로 표시된 것입니다.
301 리디렉션과 302 리디렉션의 차이점은 무엇입니까?
A 301 (Moved Permanently) tells Google that the page has permanently moved and passes approximately 99% of the source page's link equity (PageRank) to the new URL — it's the standard redirect for SEO. A 302 (Found / Temporary) tells Google the move is temporary and retains the original URL's rankings rather than consolidating them at the new URL. For permanently moved pages, always use 301.
리디렉션 루프를 수정하려면 어떻게 해야 하나요?
A redirect loop (A → B → A) prevents Googlebot and users from reaching the final page. To fix it: (1) Use our redirect checker to identify exactly which URLs are in the loop, (2) Go to your redirect plugin (e.g., Redirection in WordPress) or .htaccess file, (3) Find the redirect rules for each URL in the loop, (4) Identify which rule creates the circular reference, and (5) Delete or update that rule so the chain terminates at a page that returns 200. For WordPress sites, SkySEOManager Pro can identify and fix redirect issues automatically using AI.
리디렉션 체인에 홉이 너무 많은 이유는 무엇입니까?
Redirect chains grow over time when pages are moved multiple times without updating the source redirect. For example: /old-page → /page-v2 → /current-page. Google recommends no more than one or two hops. To fix a long chain, update the source redirect to point directly to the final destination URL, bypassing all intermediate redirects. Our redirect chain checker shows the full chain so you know exactly which intermediate URLs to update.
내 사이트가 HTTP에서 HTTPS로 리디렉션되는지 어떻게 확인하나요?
Enter your HTTP URL (e.g. http://yoursite.com) into the redirect checker and click "Check Redirects." If HTTPS is correctly set up, you should see HTTP 301 → https://yoursite.com. If you see HTTP 200, the HTTP version of your site is accessible without redirecting — this creates duplicate content and means Google may index both versions. Fix it by adding a 301 redirect rule in your .htaccess or server configuration.
리디렉션 체인은 무엇이며 왜 SEO에 해를 끼치나요?
A redirect chain is when URL A redirects to URL B, which redirects to URL C, and so on — rather than going directly from A to C. Each hop in a redirect chain causes: (1) additional server round-trips that slow down page loading, (2) a small loss of link equity at each hop, and (3) wasted crawl budget as Googlebot follows unnecessary steps. The fix is to update the first redirect to point directly to the final destination, collapsing the chain to a single hop.
전체 웹사이트에 대한 리디렉션을 어떻게 확인하나요?
무료 대량 리디렉션 검사기를 사용하면 한 번에 최대 10개의 URL을 확인할 수 있습니다. 수백 개의 URL에 대한 전체 사이트 감사를 위해 전체 사이트를 크롤링하고 모든 리디렉션 및 체인을 보고하는 Screaming Frog SEO Spider(최대 500개의 무료 URL)를 다운로드하는 것이 좋습니다. 또는 리디렉션 플러그인(예: 리디렉션)에서 리디렉션 목록을 내보내고 가장 중요한 URL을 대량 검사기에 붙여넣어 확인하세요.
"404 리디렉션 검사기" 옵션은 무엇을 확인하나요?
A 404 redirect check verifies whether a URL that previously returned 404 (not found) has been given a redirect. Our tool traces the full chain from any URL — so if you enter a broken URL, you'll see immediately whether it still returns 404 or whether a redirect has been created. For WordPress sites with many 404 errors, SkySEOManager Pro uses Gemini AI to automatically create 301 redirects for every broken URL in minutes.

Check Your Redirects Free — Instant Results

전체 리디렉션 체인, HTTP 상태 코드 및 SEO 권장 사항을 보려면 위에 URL을 입력하세요. 무료이며 계정이 필요하지 않습니다.

Fix 404s With AI →